Designed for mowing fields and light brush up to 1" in diameter, hydraulic Pulsar models are the ideal cutting attachments for skid loaders. The hydraulic motor is matched to the flow of the skid loader to provide optimal performance. Coupled directly to the hydraulic motor, the drive spindle is supported by two bearings allowing the power to be transferred directly to the blade assembly without the need for a gear box.
Hydraulic Pulsar models come standard with a front push bar for bending over light brush, a chain curtain to prevent materials from be ejected from under the deck, and a floating pivot mount which allows the mower to follow the contours of the ground.
|Shipping Weight (LBS.)||770||985|
|Cutting Height||min 2"||min 2"|
|Max Brush Diameter||2"||2"|
|Tip Speed (Ft/Min)||See Flow Chart||See Flow Chart|
|Acres/Hr (5 MPH)||2.73||3.27|
|Blades (Qty.)||1/2" x 3" (3)||1/2" x 3" (3)|
|Hydraulic Requirement *||See Flow Chart||See Flow Chart|
|Protection||Relief Valve||Relief Valve|
* To ensure optimum performance, hydraulic output must match motor package.
GPM Flow Chart
|GPM||PRCH60 (FT/Min)||PRCH72 (FT/Min)|